Light Oil Burner PRESS T/G Series
Technical data
- Three-stage light oil burners
- Available model : PRESS140 T/G, PRESS200 T/G, PRESS300 T/G, PRESS450 T/G
- Maximun output range (kW) : 1660-5340
- Power Supply Voltage (V) : 380
- Power Supply Frequency (Hz): 50
Specifications
Burner: Monoblock forced draught oil burner with three stage operation, fully automatic, made up of:
- Air suction circuit lined with sound-proofing material – Fan with forward curved blades high performance pressure levels
- Air dampers for air setting controlled by a three stage hydraulic ram
- Starting motor at 2850 rpm, three-phase 400 V with neutral, 50 Hz
- Combustion head, that can be set on the basis of the combustion output, fitted with:
- stainless steel end cone, resistant to corrosion and high temperatures
- ignition electrodes
- flame stability disk
- Gears pump for high pressure fuel supply, fitted with:
- filter
- pressure regulator
- connections for installing a pressure gauge and vacuometer
- internal by-pass for single pipe installation
- Valve unit with a oil safety valve and three oil delivery valves on the output circuit;
- Photocell for flame detection
- Microprocessor based flame control panel, with diagnostic function
- Burner on/off switch
- Flame inspection window
- Slide bars for easier installation and maintenance
- Protection filter against radio interference
- IP 40 electric protection level
Conforming to:
- 89/336 (2004/108) EC directive (electromagnetic compatibility)
- 73/23 (2006/95) EC directive (low voltage)
- 92/42/EC directive (performance)
- 98/37/EC directive (machinery)
- EN 267 (liquid fuel burners)
Standard equipment:
- 2 flexible pipes for connection to the oil supply network
- 2 nipples for the connection to the pump
- 4 wiring looms fittings for electrical connections
- 4 screws for fixing the burner flange to the boiler
- Instruction handbook for installation, use and maintenance
- Spare parts catalogue
- 2 slide bar extensions (for the extended head models of P 300 T/G and P 450 T/G)
- 3 nozzles – Gasket for flange – Starter (*)
- Diffuser disk (P 450 T/G). (*) For versions with star-delta starting
Available accessories to be ordered separately:
- Nozzles
- Spacer kit
- Sound-proofing box
- Burner support
- PC interface kit
ติดต่อเรา
ท่านสามารถติดต่อสอบถามขอรายละเอียดการใช้งานสินค้าหหัวพ่นไฟ หรือราคาได้ที่
Tel : 02-898-3000, 081-835-0842
หรือสามารถขอใบเสนอราคาได้ที่
Fax : 02-898-3336, 02-898-3323
E-mail : sales_bangkok@vanichgroup.com
รายละเอียดสินค้า
