Gas Burner RS Series
Technical data
- Two-stage gas burners (High/low)
- Available model : RS34 MZ, RS44 MZ, RS50, RS 64MZ, RS70, RS100, RS130, RS150, RS190
- Maximun output range (kW) : 390 – 2290
- Power Supply Voltage (V) : 220 (RS34 MZ, RS44 MZ), 380
- Power Supply Frequency (Hz): 50
Specifications
RS 34 MZ – 44 MZ models:
Monoblock forced draught gas burner with two stage operation, fully automatic, made up of:
- Air suction circuit with sound proofing material
- High performance fan with straight blades
- Air damper for air flow setting and butterfly valve for regulating fuel output on 1st and 2nd stage controlled by a servomotor with variable cam
- Starting motor at 2800 rpm, single-phase / 220-230V / 50-60Hz or three-phase / 380-400V / 50-60Hz
- Combustion head, that can be set on the basis of required output, fitted with:
- stainless steel end cone, resistant to corrosion and high temperatures
- ignition electrodes – ionisation probe
- gas distributor
- flame stability disk
- Exclusive patented HCS (Housing Cooling System) with high thermal insulation and air circulation with continuous air volume refresh for an active cooling system and avoid heat transfer to the electrical component housing
- Minimum air pressure switch stops the burner in case of insufficient air quantity at the combustion head
- Microprocessor-based burner safety control box, with diagnostic functions
- Plug and socket for electrical connections accessible from the external of the cover
- Burner on/off selection switch – 1st – 2nd stage manual switch
- Flame inspection window
- Slide bars for easier installation and maintenance
- Protection filter against radio interference
- IP X0D (IP 40) electric protection level
Standard equipment:
- 1 gas train flange
- 1 flange gasket
- 4 screws for fixing the flange
- 1 thermal screen
- 4 screws for fixing the burner flange to the boiler
- 3 plugs for electrical connection (RS 34 – 44 MZ single-phase)
- 4 plugs for electrical connection (RS 44 MZ three-phase)
- instruction handbook for installation, use and maintenance
- spare parts catalogue
RS 50 – 64 MZ – 70 – 100 – 130 – 150 – 190 models:
Monoblock forced draught gas burner with two stage operation, fully automatic, made up of:
- Air suction circuit lined with sound-proofing material
- Fan with reverse curve blades (RS 50 – 70 – 100 – 130 models) or straight blades (RS 64 MZ – 150-190 models)
- Air damper for air flow setting and butterfly valve for regulating fuel output on 1st and 2nd stage controlled by a servomotor with variable cam
- Starting motor at 2800 rpm, three-phase 400V with neutral, 50Hz
- Combustion head, that can be set on the basis of required output, fitted with:
- stainless steel end cone, resistant to corrosion and high temperatures
- ignition electrodes
- ionisation probe
- gas distributor
- flame stability disk
- Minimum air pressure switch stops the burner in case of insufficient air quantity at the combustion head
- Microprocessor-based burner safety control box, with diagnostic functions
- Plug and socket for electrical connections (RS 50-64 models)
- Burner on/off selection switch
- 1st – 2nd stage manual switch
- Flame inspection window
- Slide bars for easier installation and maintenance
- Protection filter against radio interference
- IP 44 electric protection level
Standard equipment:
- 1 gas train flange
- 1 flange gasket
- 4 screws for fixing the flange
- 1 thermal screen
- 4 screws for fixing the burner flange to the boiler
- Wiring loom fittings for the electrical connection (RS 50-64)
- 2 slide bar extensions (for extended head models and RS 150-190 model)
- instruction handbook for installation, use and maintenance
- spare parts catalogue
ติดต่อเรา
ท่านสามารถติดต่อสอบถามขอรายละเอียดการใช้งานสินค้ามอเตอร์ไฟฟ้า มอเตอร์เบรค หรือราคาได้ที่
Tel : 02-898-3000, 089-780-0167
หรือสามารถขอใบเสนอราคาได้ที่
Fax : 02-898-3336, 02-898-3323
E-mail : sales_bangkok@vanichgroup.com