Gas Burner RS/E-EV MZ Series
Technical data
- Modulating gas burners with electronic cam
- Available model : RS 310/E-/EV MZ, RS 410/E-/EV MZ, RS 510/E-/EV MZ, RS 610/E-/EV MZ
- Maximun output range (kW) : 3900 – 6300
- Power Supply Voltage (V) : 380
- Power Supply Frequency (Hz): 50
Specifications
Monoblock forced draught burners with two stage progressive or modulating operation, with a specific kit, fully automatic, made up of:
- Microprocessor-based Digital Burner Management System (RS/E MZ models)
- Microprocessor-based Digital Burner Management System with Variable Speed Drive technology for the control of a Frequency Inverter (RS/EV MZ models)
- Display Interface operating unit to adjust the system
- Air suction circuit lined with sound-proofing material
- High performance fan with low sound emissions, forward curve blades
- Air damper for air flow setting and butterfly valve for regulating fuel output controlled by independent steppermotor actuators
- Air pressure switch
- Fan starting motor at 2900 rpm, three-phase 230/400 – 400/690 V with neutral, 50 Hz
- Combustion head, that can be set on the basis of required output, fitted with:
- stainless steel end cone, resistant to corrosion and high temperatures
- ignition electrodes; ionisation sensor for flame detection (or UV sensor on demand)
- flame stability disk
- Maximum gas pressure switch, with pressure test point, for halting the burner in the case of over pressure on the fuel supply line
- Star/delta starter for the fan motor (Direct starter fan motor for RS 310-410 models)
- Main electrical supply terminal board
- Burner on/off switch
- Manual or automatic output increase/decrease switch
- Contacts motor and thermal relay with release button
- Burner failure led signal and lighted release button
- Burner opening hinge
- Lifting rings
- IP 54 electric protection level
Standard equipment:
- Gasket for gas train adaptor
- Adaptor for gas train
- Screws for fixing the gas train adaptor: M 16 x 70
- Thermal insulation screen
- M 18 x 60 screws to secure the burner flange to the boiler Cable grommets kit for optional electrical wiring input
- M16 x 6 studs for fixing the gas elbow to the pipe coupling
- M16 nuts to fix the gas elbow to the pipe coupling
- Instruction handbook for installation, use and maintenance
- Spare parts catalogue
Conforming to:
- 2014/30/UE directive (electromagnetic compatibility)
- 2014/35/UE directive (low voltage)
- 2009/142/EC directive (gas)
- 2006/42/EC directive (machine)
- EN 676 (gas burners)
ติดต่อเรา
ท่านสามารถติดต่อสอบถามขอรายละเอียดการใช้งานสินค้าหัวพ่นไฟ หรือราคาได้ที่
Tel : 02-898-3000, 081-835-0842
หรือสามารถขอใบเสนอราคาได้ที่
Fax : 02-898-3336, 02-898-3323
E-mail : sales_bangkok@vanichgroup.com